Traditional Cedar Lean To Greenhouses
|
|
When space is limited, Alton Traditional cedar Lean-To greenhouses are just 5 feet wide and make an ideal solution as they include a host of greenhouse features such as ventilation options, guttering etc. The vertical sides easily accommodate high level storage, making this model ideal for propagating young plants. It’s also very cost-effective to heat as your wall warms up during the day and then slowly releases heat back into the greenhouse during the night.
N.b. photo shows optional cedar clip on panels, these are not included as standard.
|
|
|
Suggested options |
• Toughened safety glass
• Full-length glazing sections
• Concrete base kerbs
• Roof vents
• Alton Ventaccess
• Kerb-less threshold
• Factory-applied preservative treatment
• Guttering and downpipes |
|
• Louvre vents
• Clip-on cedar panels
• Internal shading
For full installation instructions contact your local Retailer. |
|
|
Greenhouse
(width)
|
Standard Lengths
|
Ridge
Height
|
Door Opening
Width Height
|
|
5’0”
1.52m
|
5’6”
1.67m
|
8’
2.43m
|
10’6”
3.20m
|
13’
3.96m
|
7’9”
2.36m
|
2’4”
0.71m
|
5’11”
1.80m
|
Eaves height: 5’4½” (1.64m) on all models. Maximum internal clearance at ridge is 7’4” (2.25m) from ground level. Flashing between the wall and Lean-to Greenhouse is not supplied. All dimensions are external. Heights include 5” (13cm) concrete base kerbs.Longer models are available on request, plus extension modules (5’) to add at a later date.
|
